.: HID Mounting (Part 1)

I only have one HID in so far.

First things first. Went to visit the LS1 that morning to pull the wiring harness off. But I left my toolset in the rx7, so I couldn’t take off a few of the wires.


Sadly, no pictures as we were cutting the mounts. Anyway, here they are with the projector mounted in the old halogen base. I’m using the old base for adjustability, and using the adjusters that shipped with the HID module just to mount it to the plastic.


I ended up having to cut two squares out of the bottom of the fiberglass popup housing to fit the back of the projector. There’s enough clearance there now for me to adjust the shit out of it. You can sort of see the holes in the first two pictures.


By then, it got late. So I used the high beams from the prelude to sort of help out.

As you can probably tell, this really fucking sucked.

Got the ballast and wiring harness all happily connected:


But, I bought two of everything. So I took the bulb out of the other projector housing and mounted it in my already-finished housing. Got everything nice and put back together.